Accessories 

Accessories

A wide range of accesories for solenoid valves is available here, including connectors, cables, hose, thread sealant and filters. Electronic accessories include timers and a power saving module. Fittings can be found in the fittings pageImprove your system with these high quality accessories.

There are 56 products.

Subcategories

per page
Showing 1 - 50 of 56 items

DIN - A connector (IP65). Suitable for solenoid valves with a DIN - A connector for voltages from 12V up to 380V.

£ 1.99  (£ 2.41 tax incl.)
In stock
In Stock

1 spool PTFE (teflon) thread seal tape. Lenght = 12m, width = 12mm and thickness = 0.075mm.

£ 1.95  (£ 2.36 tax incl.)
In stock
In Stock

DIN - B connector (IP65) with an LED indicator. Useful tool to see if the coil is energised. Suitable for solenoid valves with a DIN - B connector for voltages from 12V up to 380V. Please note: when DC is used, the brown pole should be connected to the positive terminal.

£ 2.99  (£ 3.62 tax incl.)
In stock
In Stock

DIN - B connector (IP65). Suitable for solenoid valves with a DIN - B connector for voltages from 12V up to 380V.

£ 2.99  (£ 3.62 tax incl.)
In stock
In Stock

DIN - A connector (IP65) with an LED indicator. Useful tool to see if the coil is energised. Suitable for solenoid valves with a DIN - A connector for voltages from 12V up to 380V. Please note: when DC is used, the brown pole should be connected to the positive terminal.

£ 2.99  (£ 3.62 tax incl.)
In stock
In Stock

DIN - C connector (IP65). Suitable for solenoid valves with a DIN - C connector for voltages from 12V up to 380V.

£ 1.49  (£ 1.80 tax incl.)
In stock
In Stock

Digital timer for solenoid valve (24-230V AC/DC). On- and off-time programmable from 0-100 hours in steps of 1 second. Three available operating modes: repeating ON-OFF, repeating OFF-ON, ON-OFF. Compatible with DIN-A connector. Please note: solenoid valve not included.

£ 36.99  (£ 44.76 tax incl.)
In stock
In Stock

Filter with G1/2 inch male thread. This filter can be mounted on a check valve and be used as foot valve. A foot valve is a check valve on the bottom of a suction line to prevent backflow.

£ 1.79  (£ 2.17 tax incl.)
In stock
In Stock

DIN - A connector (IP65) with three meters of cable. Suitable for solenoid valves with a DIN - A connector for voltages from 12V up to 380V. Please note: when DC is used, the brown pole should be connected to the positive terminal.

£ 8.99  (£ 10.88 tax incl.)
In stock
In Stock

DIN - B connector (IP65) with three meters of cable. Suitable for solenoid valves with a DIN - B connector for voltages from 12V up to 380V. Please note: when DC is used, the brown pole should be connected to the positive terminal.

£ 8.99  (£ 10.88 tax incl.)
In stock
In Stock

Float Switch MAC3 Key to regulate water levels. Including 3 meter cable and balance weight. The switch can be used for both Normally Open (NO) and Normally Closed (NC) operation. The switch is suitable for a nominal current of 4 A at 250V AC.

£ 17.99  (£ 21.77 tax incl.)
In stock
In Stock

Analog timer for solenoid valves (24-230V AC/DC). Adjustable on-time from 0-10 seconds, and off-time from 0 to 45 minutes. Compatible with DIN-A connector. Please note: solenoid valve not included.

£ 26.99  (£ 32.66 tax incl.)
In stock
In Stock

Brass Y-shaped strainer with G3/8 inch threads and stainless steel mesh. For media between 0°C and 90°C. Can be used in one flow direction.

£ 3.49  (£ 4.22 tax incl.)
In stock
In Stock

Muffler of sintered bronze with G1/4" male thread. Amongst others suited for pneumatic valves with exhaust ports.

£ 1.99  (£ 2.41 tax incl.)
In stock
In Stock

Hose clamp of galvanised steel with a nominal diameter of 11mm and an adjustable range from 10-12mm.

£ 0.99  (£ 1.20 tax incl.)
In stock
In Stock

Messing particle filter with ball valve. The threads 1/2 are located at an angle of 90 degrees, the filter (stainless steel) has a mesh size of 500µm. For media of -10°C to 100°C to an operating pressure of 40 bar. Suitable for solenoid valves.

£ 10.99  (£ 13.30 tax incl.)
In stock
In Stock

Stainless Steel Y-shaped strainer with G1/4 inch threads and stainless steel mesh. For media between -20°C and 230°C. Can be used in one flow direction.

£ 13.99  (£ 16.93 tax incl.)
In stock
In Stock

Filter with G1-1/2 inch male thread. This filter can be mounted on a check valve and be used as foot valve. A foot valve is a check valve on the bottom of a suction line to prevent backflow.

£ 3.49  (£ 4.22 tax incl.)
In stock
In Stock

Muffler of sintered bronze with M5 male thread. Amongst others suited for pneumatic valves with exhaust ports.

£ 1.89  (£ 2.29 tax incl.)
In stock
In Stock

Hose clamp of galvanised steel with a nominal diameter of 9mm and an adjustable range from 8-10mm.

£ 0.99  (£ 1.20 tax incl.)
In stock
In Stock

Filter with G1 inch male thread. This filter can be mounted on a check valve and be used as foot valve. A foot valve is a check valve on the bottom of a suction line to prevent backflow.

£ 2.99  (£ 3.62 tax incl.)
In stock
In Stock

Filter with G3/4 inch male thread. This filter can be mounted on a check valve and be used as foot valve. A foot valve is a check valve on the bottom of a suction line to prevent backflow.

£ 1.99  (£ 2.41 tax incl.)
In stock
In Stock

Filter with G2 inch male thread. This filter can be mounted on a check valve and be used as foot valve. A foot valve is a check valve on the bottom of a suction line to prevent backflow.

£ 3.99  (£ 4.83 tax incl.)
In stock
In Stock

Thread Sealant and locking agent simultaneously (Loxeal blue, 50ml). Wide range of applications. Certified for drinking water, oxygen, medical, food and gas.

£ 12.99  (£ 15.72 tax incl.)
In stock
In Stock

Hose clamp of galvanised steel with a nominal diameter of 7mm and an adjustable range from 6-8mm.

£ 0.99  (£ 1.20 tax incl.)
In stock
In Stock

4mmx2.5mm PU Hose (length of 10 meters) for compressed air and water. Ideal use in combination with push-in fittings. Suited for food products.

£ 7.99  (£ 9.67 tax incl.)
In stock
In Stock

Stainless Steel Y-shaped strainer with G3/8 inch threads and stainless steel mesh. For media between -20°C and 230°C. Can be used in one flow direction.

£ 13.99  (£ 16.93 tax incl.)
In stock
In Stock

Brass Y-shaped strainer with G1/2 inch threads and stainless steel mesh. For media between 0°C and 90°C. Can be used in one flow direction.

£ 4.99  (£ 6.04 tax incl.)
In stock
In Stock

Muffler of sintered bronze with G3/8" male thread. Amongst others suited for pneumatic valves with exhaust ports.

£ 2.99  (£ 3.62 tax incl.)
In stock
In Stock

Stainless Steel Y-shaped strainer with G1/2 inch threads and stainless steel mesh. For media between -20°C and 230°C. Can be used in one flow direction.

£ 13.99  (£ 16.93 tax incl.)
In stock
In Stock

8mmx5.5mm PU Hose (length of 10 meters) for compressed air and water. Ideal use in combination with push-in fittings. Suited for food products.

£ 11.99  (£ 14.51 tax incl.)
In stock
In Stock

Nylon particulate filter (brand RPE) with NBR seal, 1/4" female threads and 125µm mesh filter (stainless steel). For media from 0.0 up to 60°C and pressures from 0.0 up to 10 bar. Usable in both flow directions, very suitable in combination with solenoid valves.

£ 16.99  (£ 20.56 tax incl.)
In stock
In Stock

Muffler of sintered bronze with G1/8" male thread. Amongst others suited for pneumatic valves with exhaust ports.

£ 1.89  (£ 2.29 tax incl.)
In stock
In Stock

Brass Y-shaped strainer with G1 inch threads and stainless steel mesh. For media between 0°C and 90°C. Can be used in one flow direction.

£ 9.99  (£ 12.09 tax incl.)
In stock
In Stock

Nylon particulate filter (brand RPE) with NBR seal, 1/2" female threads and 125µm mesh filter (stainless steel). For media from 0.0 up to 60°C and pressures from 0.0 up to 10 bar. Usable in both flow directions, very suitable in combination with solenoid valves.

£ 16.99  (£ 20.56 tax incl.)
In stock
In Stock

6mmx3.9mm PU Hose (length of 10 meters) for compressed air and water. Ideal use in combination with push-in fittings. Suited for food products.

£ 9.99  (£ 12.09 tax incl.)
In stock
In Stock

Stainless Steel Y-shaped strainer with G1 inch threads and stainless steel mesh. For media between -20°C and 230°C. Can be used in one flow direction.

£ 27.99  (£ 33.87 tax incl.)
In stock
In Stock

Stainless Steel Y-shaped strainer with G3/4 inch threads and stainless steel mesh. For media between -20°C and 230°C. Can be used in one flow direction.

£ 18.99  (£ 22.98 tax incl.)
In stock
In Stock

8mmx5.5mm PU Hose (spool 50m) for compressed air and water. Ideal use in combination with push-in fittings. Suited for food products.

£ 49.99  (£ 60.49 tax incl.)
In stock
In Stock

6mmx3.9mm PU Hose (spool 50m) for compressed air and water. Ideal use in combination with push-in fittings. Suited for food products.

£ 31.99  (£ 38.71 tax incl.)
In stock
In Stock

4mmx2.5mm PU Hose (spool 50m) for compressed air and water. Ideal use in combination with push-in fittings. Suited for food products.

£ 22.99  (£ 27.82 tax incl.)
In stock
In Stock

Muffler of sintered bronze with G1/4" male thread. Amongst others suited for pneumatic valves with exhaust ports. Value pack of 10 pieces!

£ 17.91  (£ 21.67 tax incl.)
In stock
In Stock

Muffler of sintered bronze with M5 male thread. Amongst others suited for pneumatic valves with exhaust ports. Value pack of 10 pieces!

£ 17.01  (£ 20.58 tax incl.)
In stock
In Stock

Hose clamp of galvanised steel with a nominal diameter of 11mm and an adjustable range from 10-12mm. Value pack of 10 pieces!

£ 8.91  (£ 10.78 tax incl.)
In stock
In Stock

Hose clamp of galvanised steel with a nominal diameter of 9mm and an adjustable range from 8-10mm. Value pack of 10 pieces!

£ 8.91  (£ 10.78 tax incl.)
In stock
In Stock

Muffler of sintered bronze with G1/8" male thread. Amongst others suited for pneumatic valves with exhaust ports. Value pack of 10 pieces!

£ 17.01  (£ 20.58 tax incl.)
In stock
In Stock

Hose clamp of galvanised steel with a nominal diameter of 7mm and an adjustable range from 6-8mm. Value pack of 10 pieces!

£ 8.91  (£ 10.78 tax incl.)
In stock
In Stock

Brass Y-shaped strainer with G1-1/2 inch threads and stainless steel mesh. For media between 0°C and 90°C. Can be used in one flow direction.

£ 22.99  (£ 27.82 tax incl.)
In stock
In Stock

Brass Y-shaped strainer with G1-1/4 inch threads and stainless steel mesh. For media between 0°C and 90°C. Can be used in one flow direction.

£ 17.99  (£ 21.77 tax incl.)
In stock
In Stock

DIN - C connector (IP65) with an LED indicator. Useful tool to see if the coil is energised. Suitable for solenoid valves with a DIN - C connector for voltages from 12V up to 380V. Please note: when DC is used, the brown pole should be connected to the positive terminal.

£ 2.49  (£ 3.01 tax incl.)
Request lead time
Out of stock
Out of stock
Thumbnail Product
Down up
Price
Down up
Function
Down up
Voltage
Down up
Port
Down up
Seal
Down up
Min pres (bar)
Down up
Max pres (bar)
Down up
Orifice (mm)
Down up
Housing
Down up
Max temp (°C)
Down up
Connector
Down up
Series
Down up
IP
Down up
Connector (DIN - A)

AS-CA

£ 1.99   (£ 2.41 tax incl.)

In stock

                  DIN - A AS IP65
Teflon Tape 1 spool (12m)

AA-TT

£ 1.95   (£ 2.36 tax incl.)

In stock

                    AA  
Connector with LED (DIN - B)

AS-CBL

£ 2.99   (£ 3.62 tax incl.)

In stock

                  DIN - B AS IP65
Connector (DIN - B)

AS-CB

£ 2.99   (£ 3.62 tax incl.)

In stock

                  DIN - B AS IP65
Connector with LED (DIN - A)

AS-CAL

£ 2.99   (£ 3.62 tax incl.)

In stock

                  DIN - A AS IP65
Connector (DIN - C)

AF-CC

£ 1.49   (£ 1.80 tax incl.)

In stock

        0         DIN - C AF IP65
Digital Timer

AF-TD

£ 36.99   (£ 44.76 tax incl.)

In stock

                  DIN - A AF IP65
Filter for check valve G1/2''

FCM012

£ 1.79   (£ 2.17 tax incl.)

In stock

    1/2 inch               FCM  
Connector (DIN-A) with 3m cable and LED

AF-CAL3M

£ 8.99   (£ 10.88 tax incl.)

In stock

                  DIN - A AF IP65
Connector (DIN-B) with 3m cable and LED

AF-CBL3M

£ 8.99   (£ 10.88 tax incl.)

In stock

                  DIN - B AF IP65
Float switch MAC3 Key 3m Cable

KPM0306KY0C

£ 17.99   (£ 21.77 tax incl.)

In stock

  250V AC     0 1   PP 50   Key IP68
Analog timer round

SMD-720

£ 26.99   (£ 32.66 tax incl.)

In stock

                  DIN - A AF IP65
924 - G3/8'' Strainer Brass

924B038

£ 3.49   (£ 4.22 tax incl.)

In stock

    3/8 inch PTFE 0 16 10 Brass 90   924  
Pneumatic Muffler Sintered Bronze G1/4''

GL-14

£ 1.99   (£ 2.41 tax incl.)

In stock

    1/4 inch         Sinterbrons        
sl-12 mini hose clamp galvanised steel 10-12mm

SL-12

£ 0.99   (£ 1.20 tax incl.)

In stock

              Galvanized steel        
Filter 1/2'' with manual valve

BF-012A90

£ 10.99   (£ 13.30 tax incl.)

In stock

2/2 way   1/2 inch   0.0 40 8 Brass 100   BF  
657 - G1/4'' Strainer Stainless Steel

657S014

£ 13.99   (£ 16.93 tax incl.)

In stock

    1/4 inch PTFE   40 10 Stainless steel 230   657  
Filter for check valve G1-1/2''

FCM112

£ 3.49   (£ 4.22 tax incl.)

In stock

    1-1/2 inch               FCM  
Pneumatic Muffler Sintered Bronze M5

GL-M5

£ 1.89   (£ 2.29 tax incl.)

In stock

    M5         Sinterbrons        
sl-10 mini hose clamp galvanised steel 8-10mm

SL-10

£ 0.99   (£ 1.20 tax incl.)

In stock

              Galvanized steel        
Filter for check valve G1''

FCM100

£ 2.99   (£ 3.62 tax incl.)

In stock

    1 inch               FCM  
Filter for check valve G3/4''

FCM034

£ 1.99   (£ 2.41 tax incl.)

In stock

    3/4 inch               FCM  
Filter for check valve G2''

FCM200

£ 3.99   (£ 4.83 tax incl.)

In stock

    2 inch               FCM  
Thread sealant Loxeal Blue (50ml)

5503050LOXEAL

£ 12.99   (£ 15.72 tax incl.)

In stock

                200      
sl-08 mini hose clamp galvanised steel 6-8mm

SL-08

£ 0.99   (£ 1.20 tax incl.)

In stock

              Galvanized steel        
4mmx2.5mm PU hose (10 meter)

PU-4-1198-10m

£ 7.99   (£ 9.67 tax incl.)

In stock

    4mm     22     60      
657 - G3/8'' Strainer Stainless Steel

657S038

£ 13.99   (£ 16.93 tax incl.)

In stock

    3/8 inch PTFE   40 12 Stainless steel 230   657  
924 - G1/2'' Strainer Brass

924B012

£ 4.99   (£ 6.04 tax incl.)

In stock

    1/2 inch PTFE 0 16 15 Brass 90   924  
Pneumatic muffler sintered bronze R3/8''

GL-38

£ 2.99   (£ 3.62 tax incl.)

In stock

    3/8 inch   0     Sinterbrons        
657 - G1/2'' Strainer Stainless Steel

657S012

£ 13.99   (£ 16.93 tax incl.)

In stock

    1/2 inch PTFE   40 15 Stainless steel 230   657  
8mmx5.5mm PU hose (10 meter)

PU-8-1198-10m

£ 11.99   (£ 14.51 tax incl.)

In stock

    8mm     22     60      
Filter nylon 10bar 125 micron 1/4''

RVM120310P

£ 16.99   (£ 20.56 tax incl.)

In stock

    1/4 inch NBR 0.0 10 6.1 Nylon 60   R  
Pneumatic Muffler Sintered Bronze G1/8''

GL-18

£ 1.89   (£ 2.29 tax incl.)

In stock

    1/8 inch         Sinterbrons        
924 - G1'' Strainer Brass

924B100

£ 9.99   (£ 12.09 tax incl.)

In stock

    1 inch PTFE 0 16 25 Brass 90   924  
Filter nylon 10bar 125 micron 1/2''

RVM120510P

£ 16.99   (£ 20.56 tax incl.)

In stock

    1/2 inch NBR 0.0 10 6.1 Nylon 60   R  
6mmx3.9mm PU hose (10 meter)

PU-6-1198-10m

£ 9.99   (£ 12.09 tax incl.)

In stock

    6mm     22     60      
657 - G1'' Strainer Stainless Steel

657S100

£ 27.99   (£ 33.87 tax incl.)

In stock

    1 inch PTFE   40 25 Stainless steel 230   657  
657 - G3/4'' Strainer Stainless Steel

657S034

£ 18.99   (£ 22.98 tax incl.)

In stock

    3/4 inch PTFE   40 20 Stainless steel 230   657  
8mmx5.5mm PU hose (spool 50m)

PU-8-1198-50-1

£ 49.99   (£ 60.49 tax incl.)

In stock

    8mm     22     60      
6mmx3.9mm PU hose (spool 50m)

PU-6-1198-50-1

£ 31.99   (£ 38.71 tax incl.)

In stock

    6mm     22     60      
4mmx2.5mm PU hose (spool 50m)

PU-4-1198-50-1

£ 22.99   (£ 27.82 tax incl.)

In stock

    4mm     22     60      
Pneumatic Muffler Sintered Bronze G1/4'' (10 pcs)

GL-14-10

£ 17.91   (£ 21.67 tax incl.)

In stock

    1/4 inch   0     Sinterbrons        
Pneumatic Muffler Sintered Bronze M5 (10 pcs)

GL-M5-10

£ 17.01   (£ 20.58 tax incl.)

In stock

    M5   0     Sinterbrons        
sl-12 mini hose clamp galvanised steel 10-12mm (10 pcs)

SL-12-10

£ 8.91   (£ 10.78 tax incl.)

In stock

        0     Galvanized steel        
sl-10 mini hose clamp galvanised steel 8-10mm (10 pcs)

SL-10-10

£ 8.91   (£ 10.78 tax incl.)

In stock

        0     Galvanized steel        
Pneumatic Muffler Sintered Bronze G1/8'' (10 pcs)

GL-18-10

£ 17.01   (£ 20.58 tax incl.)

In stock

    1/8 inch   0     Sinterbrons        
sl-08 mini hose clamp galvanised steel 6-8mm (10 pcs)

SL-08-10

£ 8.91   (£ 10.78 tax incl.)

In stock

        0     Galvanized steel        
924 - G1-1/2'' Strainer Brass

924B112

£ 22.99   (£ 27.82 tax incl.)

In stock

    1-1/2 inch PTFE 0 16 41 Brass 90   924  
924 - G1-1/4'' Strainer Brass

924B114

£ 17.99   (£ 21.77 tax incl.)

In stock

    1-1/4 inch PTFE 0 16 35 Brass 90   924  
Connector with LED (DIN - C)

AF-CCL

£ 2.49   (£ 3.01 tax incl.)

Request lead time

        0         DIN - C AF IP65
Showing 1 - 50 of 56 items