Angle seat valve

Angle seat valves are valves where a spindle under an angle moves the seal in a linear motion towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is usually brass or stainless steel. Due to the Y-shape... Read more Read more

Select category

Product Brand State Port Seal Housing Function Min pres Max pres Kv Orifice Max temp Series Min temp Certification
G1'' PTFE 16bar NC Angle...
£208.99 (£252.88 incl vat)
In stock
Tameson Normally closed 1 inch PTFE Stainless steel 2/2 way 0 16 - - 200 AL2 -40 -
Rp3/4'' Brass Angle Seat...
£18.49 (£22.37 incl vat)
In stock
Tameson - 3/4 inch EPDM Brass 2 way 0 10 9.39 20 90 AL2BM 0 DVGW
G1'' PTFE/NBR 16bar NC...
£103.99 (£125.83 incl vat)
In stock
Tameson Normally closed 1 inch PTFE/NBR Brass 2/2 way 0 16 - - 85 AL2 -20 -
Rp1/2'' Brass Angle Seat...
£12.49 (£15.11 incl vat)
In stock
Tameson - 1/2 inch EPDM Brass 2 way 0 10 5.12 15 90 AL2BM 0 DVGW
G1/2'' PTFE/NBR 16bar NC...
£94.99 (£114.94 incl vat)
In stock
Tameson Normally closed 1/2 inch PTFE/NBR Brass 2/2 way 0 16 - - 85 AL2 -20 -
G1/2'' PTFE 25bar NC Angle...
£170.99 (£206.90 incl vat)
In stock
Tameson Normally closed 1/2 inch PTFE Stainless steel 2/2 way 0 25 - - 200 AL2 -40 -
Rp1'' Brass Angle Seat...
In stock
Tameson - 1 inch EPDM Brass 2 way 0 10 19.92 25 90 AL2BM 0 DVGW
G3/4'' PTFE/NBR 16bar NC...
£103.99 (£125.83 incl vat)
In stock
Tameson Normally closed 3/4 inch PTFE/NBR Brass 2/2 way 0 16 - - 85 AL2 -20 -
G3/4'' PTFE 20bar NC Angle...
£179.99 (£217.79 incl vat)
In stock
Tameson Normally closed 3/4 inch PTFE Stainless steel 2/2 way 0 20 - - 200 AL2 -40 -
G3/4'' PTFE/NBR 16bar NC...
£103.99 (£125.83 incl vat)
+3 days
Tameson Normally closed 3/4 inch PTFE/NBR Brass 2/2 way 0 16 - - 85 AL2 -20 -
G1'' PTFE/NBR 16bar NO...
£179.99 (£217.79 incl vat)
+3 days
Tameson Normally open 1 inch PTFE/NBR Brass 2/2 way 0 16 - - 85 AL2 -20 -
G1-1/2'' PTFE/NBR 16bar NO...
£293.99 (£355.73 incl vat)
+3 days
Tameson Normally open 1-1/2 inch PTFE/NBR Brass 2/2 way 0 16 - - 85 AL2 -20 -
G1/2'' PTFE 25bar NC Angle...
£170.99 (£206.90 incl vat)
+3 days
Tameson Normally closed 1/2 inch PTFE Stainless steel 2/2 way 0 25 - - 200 AL2 -40 -
G2'' PTFE 4bar NC Angle...
£331.99 (£401.71 incl vat)
+3 days
Tameson Normally closed 2 inch PTFE Stainless steel 2/2 way 0 4 - - 200 AL2 -40 -
G2'' PTFE 12bar NO Angle...
£664.99 (£804.64 incl vat)
+3 days
Tameson Normally open 2 inch PTFE Stainless steel 2/2 way 0 12 - - 200 AL2 -20 -

Angle seat valve

Angle seat valves are valves where a spindle under an angle moves the seal in a linear motion towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is usually brass or stainless steel. Due to the Y-shape the medium can flow through relatively easily (few bends). As a result, these valves have a high flow capacity and Kv value in comparison with vertical globe valves. Angle seat valves are reliable, require low maintenance and are characterized by a long lifespan with millions of cycles. They are used with gases, vacuum or (viscous) liquids and seal in two directions. Other names for these valves are valve shut-off valves, Y-valves or globe valves. The valves can be manually operated by means of a screw spindle, or air operated by a piston that moves in an air cylinder. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.