There are 31 products
Show 31 products

Pneumatic

Pneumatic angle seat valves are valves where the valve seat is placed at an angle. A spindle is moved in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the... Read more Read more

Select category

There are 31 products
Show 31 products
Product Brand State Port Seal Housing Function Min pres Max pres Max temp Series
G1'' PTFE 16bar NC Angle...
£208.99 (£252.88 incl vat)
In stock
Tameson Normally closed 1 inch PTFE Stainless steel 2/2 way 0 16 200 AL2
G1'' PTFE/NBR 16bar NC...
£103.99 (£125.83 incl vat)
In stock
Tameson Normally closed 1 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G1/2'' PTFE/NBR 16bar NC...
£94.99 (£114.94 incl vat)
In stock
Tameson Normally closed 1/2 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G1/2'' PTFE 25bar NC Angle...
£170.99 (£206.90 incl vat)
In stock
Tameson Normally closed 1/2 inch PTFE Stainless steel 2/2 way 0 25 200 AL2
G3/4'' PTFE/NBR 16bar NC...
£103.99 (£125.83 incl vat)
In stock
Tameson Normally closed 3/4 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G3/4'' PTFE 20bar NC Angle...
£179.99 (£217.79 incl vat)
In stock
Tameson Normally closed 3/4 inch PTFE Stainless steel 2/2 way 0 20 200 AL2
G3/4'' PTFE/NBR 16bar NC...
£103.99 (£125.83 incl vat)
+3 days
Tameson Normally closed 3/4 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G1'' PTFE/NBR 16bar NO...
£179.99 (£217.79 incl vat)
+3 days
Tameson Normally open 1 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G1-1/2'' PTFE/NBR 16bar NO...
£293.99 (£355.73 incl vat)
+3 days
Tameson Normally open 1-1/2 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G1/2'' PTFE 25bar NC Angle...
£170.99 (£206.90 incl vat)
+3 days
Tameson Normally closed 1/2 inch PTFE Stainless steel 2/2 way 0 25 200 AL2
G2'' PTFE 4bar NC Angle...
£331.99 (£401.71 incl vat)
+3 days
Tameson Normally closed 2 inch PTFE Stainless steel 2/2 way 0 4 200 AL2
G2'' PTFE 12bar NO Angle...
£664.99 (£804.64 incl vat)
+3 days
Tameson Normally open 2 inch PTFE Stainless steel 2/2 way 0 12 200 AL2
G1/2'' PTFE/NBR 16bar NC...
£94.99 (£114.94 incl vat)
+3 days
Tameson Normally closed 1/2 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2
G1'' PTFE/NBR 16bar NC...
£113.99 (£137.93 incl vat)
+3 days
Tameson Normally closed 1 inch PTFE/NBR Brass 2/2 way 0 10 85 AL2
G1/2'' PTFE/NBR 16bar NO...
£170.99 (£206.90 incl vat)
+3 days
Tameson Normally open 1/2 inch PTFE/NBR Brass 2/2 way 0 16 85 AL2

Pneumatic

Pneumatic angle seat valves are valves where the valve seat is placed at an angle. A spindle is moved in a linear motion by an air-operated piston to move the seal towards or away from the valve seat. This seal is usually PTFE (teflon) and the valve housing is usually brass or stainless steel. Due to the Y-shape the medium can flow through relatively easily (few bends). As a result, these valves have a high flow capacity and Kv value in comparison with vertical globe valves. Angle seat valves are reliable, require low maintenance and are characterized by a long lifespan with millions of cycles. They can be applied with gases, vacuum or (viscous) liquids and seal in two directions. Other names for these valves are valve shut-off valve, Y-valves or angle seat piston valves. The valve generally closes in the same direction as the flow direction. There are special versions where the valve closes against the flow direction, in order to reduce the risk of water hammer.