There are 1771 products
Show 1771 products

Cable length (m)

Max pressure (bar) info

Diameter inner (mm)

Degree of protection (IP)

Freq. input voltage (Hz)

Kv value (m3/h) info

Max temperature (°C)

drinking water products

On this page you will find an overview of valves that are suitable for drinking water. These valves require a European approval, such as WRAS, WRc, DVGW, KTW, ACS and KIWA.

The plastic solenoid valves from RPE are approved for drinking... Read more Read more

There are 1771 products
Show 1771 products
Product Brand Connection size Voltage Material Seal material Operation Function Max pressure (bar) Degree of protection (IP) Connection type Features Min pressure difference (bar) Material quality Kv value (m3/h) Min temperature (°C) Max temperature (°C) Electrical connection Approval Valve bore (mm) Coil type Duty cycle Max. ambient temp. (°C) Max. viscosity (cSt) Model Nominal power (VA) Peak power (VA) Type of accessory/spare part Cable length (m) Diameter inner (mm) Freq. input voltage (Hz) Wrench width (mm) Diameter (mm) Nominal current (A) Length (mm) Height (mm)
Solenoid Valve RPE 1/2''...
In stock
RPE 1/2 inch 230 V AC Plastic NBR (nitrile rubber) Indirect Normally closed 10 IPX0 Inner thread cylindrical... Energy efficient (under 9 VA) 0.2 Polyamide (PA) 0.96 0 60 Faston 6.3 mm x 0.8 mm Drinking water 11 R-series 100% 60 0 Straight 8.4 0 - - - - - - - - -
Solenoid Valve 100-HV Rain...
In stock
Rain Bird 1 inch 24 V AC Plastic NBR (nitrile rubber) Indirect Normally closed 10 - Inner thread cylindrical... Energy efficient (under 9 VA) 1 Polypropylene (PP) - 0 43 - - 30 - 100% 50 0 Straight 2.4 7 - - - - - - - - -
Digital Timer
£37.56
In stock
JP Fluid Control - 24-230 V AC/DC - - - - - - - - - - - - - DIN-A - - - - - - - 0 0 Timer 0 0 50 Hz to 60 Hz 0 0 0 0 88
CS1 coil DIN-A connector...
In stock
JP Fluid Control - 230 V AC Epoxy - - - - - - - - - - - - DIN-A - - - 100 - - - 17 0 Magnetic core 0 14.7 - 0 0 0 0 37.4
CS4 coil DIN-B connector...
In stock
JP Fluid Control - 230 V AC Epoxy - - - - - - - - - - - - DIN-B - - - 100 - - - 8 0 Magnetic core 0 10.25 - 0 0 0 0 28
Solenoid Valve RPE 1/4''...
In stock
RPE 1/4 inch 12 V DC Plastic NBR (nitrile rubber) Indirect Normally closed 10 IPX0 Inner thread cylindrical... Energy efficient (under 9 VA) 0.2 Polyamide (PA) 0.95 0 60 Faston 6.3 mm x 0.8 mm Drinking water 11 R-series 100% 60 0 Straight 6.3 0 - - - - - - - - -
CS1 coil DIN-A connector...
In stock
JP Fluid Control - 24 V DC Epoxy - - - - - - - - - - - - DIN-A - - - 100 - - - 13 0 Magnetic core 0 14.7 - 0 0 0 0 37.4
Solenoid Valve 100-HVF Rain...
In stock
Rain Bird 1 inch 24 V AC Plastic NBR (nitrile rubber) Indirect Normally closed 10 - Inner thread cylindrical... Energy efficient (under 9 VA) 1 Polypropylene (PP) - 0 43 - - 30 - 100% 50 0 Straight 2.4 7 - - - - - - - - -
CS2 coil DIN-A connector...
In stock
JP Fluid Control - 230 V AC Epoxy - - - - - - - - - - - - DIN-A - - - 100 - - - 33 0 Magnetic core 0 16.3 - 0 0 0 0 37
Analog timer round
£27.45
In stock
JP Fluid Control - 24-230 V AC/DC - - - - - - - - - - - - - DIN-A - - - - - - - 0 0 Timer 0 0 50 Hz to 60 Hz 0 0 0 0 82
Solenoid Valve DF-SA 1''...
In stock
JP Fluid Control 1 inch 230 V AC Plastic EPDM Semi-direct Normally closed 8 IP65 Inner thread cylindrical... - 0 Polyamide (PA) 10.24 -30 80 DIN-A - 25 CS2 100% 50 0 Straight 33 0 - - - - - - - - -
CS1 coil DIN-A connector...
In stock
JP Fluid Control - 24 V AC Epoxy - - - - - - - - - - - - DIN-A - - - 100 - - - 17 0 Magnetic core 0 14.7 - 0 0 0 0 37.4
Solenoid Valve ST-DA 1/4''...
In stock
JP Fluid Control 1/4 inch 24 V DC Plastic EPDM Direct Normally closed 13 IP65 Inner thread cylindrical... - 0 Polyamide (PA) 0.2 0 100 DIN-A - 3 CS1 100% 50 0 Straight 13 0 - - - - - - - - -
CS4 coil DIN-B connector...
In stock
JP Fluid Control - 24 V DC Epoxy - - - - - - - - - - - - DIN-B - - - 100 - - - 6 0 Magnetic core 0 10.25 - 0 0 0 0 28
Solenoid Valve RPE single...
In stock
RPE 3/4 inch, 10 mm 24 V DC Plastic NBR (nitrile rubber) Indirect Normally closed 10 IPX0 Hose pillar, Outer thread... Energy efficient (under 9 VA) 0.2 Polyamide (PA) 1.21 0 60 Faston 6.3 mm x 0.8 mm Drinking water 10 R-series 100% 60 0 Straight 6.3 0 - - - - - - - - -
drinking water products

drinking water products

On this page you will find an overview of valves that are suitable for drinking water. These valves require a European approval, such as WRAS, WRc, DVGW, KTW, ACS and KIWA.

The plastic solenoid valves from RPE are approved for drinking water and sanitation facilities. Note that an indirect operated solenoid valve requires a pressure differential for proper operation. With a low input pressure (<0.5 bar), these valves are not suitable. In this case, a direct operated solenoid valve is a better choice.

There are different types of manual ball valves with drinking water approval. Some models have an anti-legionella and anti-frost design for added safety and protection.