There are 1497 products
Show 1497 products
valves for swimming pools
There are 1497 products
Show 1497 products
| Product | Brand | Connection size | Recommended for | Model | Voltage | Seal material | Function | Operation | Material | Degree of protection (IP) | Max pressure (bar) | Connection type | Material quality | Valve bore (mm) | Kv value (m3/h) | Max. ambient temp. (°C) | Electrical connection | Nominal power (VA) | Min pressure difference (bar) | Min temperature (°C) | Max temperature (°C) | Coil type | Duty cycle | Max pressure difference at 20 °C (bar) | Housing construction | Ball seal | Full bore | With drain | With drain possibility (connection) | Article compression class | Medically clean | Outer pipe diameter connection 1 (mm) | Outer pipe diameter connection 2 (mm) | Features | Control signal | Manual override | Operating time (s) | Position feedback | Position reporting signal | Torque (Nm) | Width (mm) | Max. electric power input (VA) | Height (mm) | Spindle seal material | Ambient temperature (°C) | Material ball seal | Transmission | Adjustable operating range | With end contacts | Frequency |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Solenoid Valve ST-SA 1/2'' stainless steel EPDM 0-10bar...ST-SA012S080E-024DC
In stock
|
JP Fluid Control | 1/2 inch | Alcohols, Carbon dioxide,... | Straight | 24 V DC | EPDM | Normally closed | Semi-direct | Stainless steel | IP65 | 10 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 8 | 1.02 | 50 | DIN-A | 13 | 0 | -30 | 130 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-DA 1/4'' stainless steel FKM 0-13bar...ST-DA014S030F-024DC
In stock
|
JP Fluid Control | 1/4 inch | Air, Carbon dioxide,... | Straight | 24 V DC | FKM (FPM) | Normally closed | Direct | Stainless steel | IP65 | 13 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 3 | 0.2 | 50 | DIN-A | 13 | 0 | -10 | 120 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-SA 1/2'' stainless steel EPDM 0-16bar...ST-SA012S080E-230AC
In stock
|
JP Fluid Control | 1/2 inch | Alcohols, Carbon dioxide,... | Straight | 230 V AC | EPDM | Normally closed | Semi-direct | Stainless steel | IP65 | 16 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 8 | 1.02 | 50 | DIN-A | 17 | 0 | -30 | 130 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
£9.98
In stock
|
Tameson | 32 mm | - | Straight | - | EPDM | - | Handle | Plastic | - | - | Glued sleeve | Polyvinyl chloride (PVC) | 25 | 60 | - | - | - | - | -10 | 60 | - | - | 16 | 3-part | EPDM | Yes | No | No | PN 16 | No | 32 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
£16.28
In stock
|
Tameson | 50 mm | - | Straight | - | EPDM | - | Handle | Plastic | - | - | Glued sleeve | Polyvinyl chloride (PVC) | 40 | 170 | - | - | - | - | -10 | 60 | - | - | 16 | 3-part | EPDM | Yes | No | No | PN 16 | No | 50 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
£13.03
In stock
|
Tameson | 40 mm | - | Straight | - | EPDM | - | Handle | Plastic | - | - | Glued sleeve | Polyvinyl chloride (PVC) | 32 | 100 | - | - | - | - | -10 | 60 | - | - | 16 | 3-part | EPDM | Yes | No | No | PN 16 | No | 40 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-SA 1/2'' stainless steel FKM 0-10bar...ST-SA012S080F-024DC
In stock
|
JP Fluid Control | 1/2 inch | Air, Carbon dioxide,... | Straight | 24 V DC | FKM (FPM) | Normally closed | Semi-direct | Stainless steel | IP65 | 10 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 8 | 1.02 | 50 | DIN-A | 13 | 0 | -10 | 120 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-DA 1/4'' stainless steel FKM 0-13bar...ST-DA014S030F-012DC
In stock
|
JP Fluid Control | 1/4 inch | Air, Carbon dioxide,... | Straight | 12 V DC | FKM (FPM) | Normally closed | Direct | Stainless steel | IP65 | 13 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 3 | 0.2 | 50 | DIN-A | 13 | 0 | -10 | 120 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve HP-DA 1/4'' high pressure stainless steel...HP-DA014S010P-024DC
In stock
|
JP Fluid Control | 1/4 inch | Air, Alcohols, Carbon... | Straight | 24 V DC | Teflon (PTFE) | Normally closed | Direct | Stainless steel | IP65 | 75 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 1 | 0.03 | 50 | DIN-A | 18 | 0 | -30 | 130 | CS3 | 100% | - | - | - | - | - | - | - | - | - | - | High pressure | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
50mm 230V AC VDL 2-way PVC Electrical ball valve614P050-AG2-230AC
In stock
|
Tameson | 50 mm | Alcohols, Carbon dioxide,... | - | 230 V AC | - | - | - | Plastic | IP67 | 16 | Glued sleeve | Polyvinyl chloride (PVC) | 40 | 170 | - | - | 23 | - | 0 | 60 | - | S2 | - | - | - | - | - | - | - | - | - | - | - | Three-point (open-close) | Yes | 4 | Open & close limit switch | None | 20 | 102 | 46 | 272.75 | EPDM | 50 °C to 50 °C | Teflon (PTFE) | With cogwheels | Yes | Yes | 50/60 Hz |
Solenoid Valve ST-DA 1/4'' stainless steel EPDM 0-13bar...ST-DA014S030E-024DC
In stock
|
JP Fluid Control | 1/4 inch | Alcohols, Carbon dioxide,... | Straight | 24 V DC | EPDM | Normally closed | Direct | Stainless steel | IP65 | 13 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 3 | 0.2 | 50 | DIN-A | 13 | 0 | -30 | 130 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-DA 1/4'' stainless steel FKM 0-13bar...ST-DA014S030F-230AC
In stock
|
JP Fluid Control | 1/4 inch | Air, Carbon dioxide,... | Straight | 230 V AC | FKM (FPM) | Normally closed | Direct | Stainless steel | IP65 | 13 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 3 | 0.2 | 50 | DIN-A | 17 | 0 | -10 | 120 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-SA 1/2'' stainless steel FKM 0-16bar...ST-SA012S080F-230AC
In stock
|
JP Fluid Control | 1/2 inch | Air, Carbon dioxide,... | Straight | 230 V AC | FKM (FPM) | Normally closed | Semi-direct | Stainless steel | IP65 | 16 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 8 | 1.02 | 50 | DIN-A | 17 | 0 | -10 | 120 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-IA 3/4'' stainless steel EPDM 0,5-16bar...ST-IA034S200E-024DC
In stock
|
JP Fluid Control | 3/4 inch | Alcohols, Carbon dioxide,... | Straight | 24 V DC | EPDM | Normally closed | Indirect | Stainless steel | IP65 | 16 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 20 | 6.4 | 50 | DIN-A | 13 | 0.5 | -30 | 130 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solenoid Valve ST-IA 1/2'' stainless steel FKM 0,5-16bar...ST-IA012S130F-024DC
In stock
|
JP Fluid Control | 1/2 inch | Air, Carbon dioxide,... | Straight | 24 V DC | FKM (FPM) | Normally closed | Indirect | Stainless steel | IP65 | 16 | Inner thread cylindrical... | Stainless steel 316 (1.4401) | 13 | 3.84 | 50 | DIN-A | 13 | 0.5 | -10 | 120 | CS1 | 100% | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
valves for swimming pools
Valves for use in swimming pools often have a stainless steel or PVC body, due to the good corrosion resistance of these materials. The stainless steel grades 304 or 316 are commonly used, of which 316 has the best properties. Under certain circumstances, they might be prone to pitting. PVC (PolyVinyl Chloride) has good mechanical properties and is corrosion resistant. Stainless steel is not suitable for components which come into contact with high concentrations of sodium hypochlorite, such as dosing valves. In this case, PVC is a better choice.
