There are 2376 products
Show 2376 products
oil & fuel technology
Select category
There are 2376 products
Show 2376 products
| Product | Brand | Connection size | Material | Voltage | Max pressure (bar) | Material ball seal | Control signal | Nominal power (VA) | Connection type | Min temperature (°C) | Max temperature (°C) | Kv value | Degree of protection (IP) | Operating time (s) | Torque (Nm) | Ambient temperature (°C) | Transmission | Valve bore (mm) | Manual operation | Auxiliary contacts (feedback) | Adjustable position feedback signal | Surface protection | Spindle seal material | Depth (mm) | Height (mm) | Width (mm) | With end contacts | Frequency | Max. electric power input (VA) | Adjustable operating range | Function | Operation | Min pressure difference (bar) | Electrical connection | Model | Coil type | Seal-material | Duty cycle | Max. ambient temp. (°C) | Position reporting signal | Ball bore | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
In stock
|
JP Fluid Control | 3/4 inch | Brass | 230 V AC | 10 | Teflon (PTFE) | Two-point | 5 | Inner thread cylindrical... | -10 | 110 | 21 | IP54 | 16 | 4 | 50 °C to 50 °C | With cogwheels | 15 | No | No | No | Untreated | EPDM | 67 | 120 | 84 | Yes | 50 Hz | 5 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 1/2 inch | Brass | 230 V AC | 10 | Teflon (PTFE) | Two-point | 5 | Inner thread cylindrical... | -10 | 110 | 8.6 | IP54 | 16 | 4 | 50 °C to 50 °C | With cogwheels | 12 | No | No | No | Untreated | EPDM | 67 | 120 | 84 | Yes | 50 Hz | 5 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 1 inch | Brass | 230 V AC | 10 | Teflon (PTFE) | Two-point | 5 | Inner thread cylindrical... | -10 | 110 | 26 | IP54 | 16 | 4 | 50 °C to 50 °C | With cogwheels | 20 | No | No | No | Untreated | EPDM | 67 | 125 | 84 | Yes | 50 Hz | 5 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 1/2 inch | Brass | 230 V AC | 16 | - | - | 17 | Inner thread cylindrical... | -10 | 120 | 1.49 | IP65 | - | - | - | - | 10.5 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Semi-direct | 0 | DIN-A | Straight | CS1 | FKM (FPM) | 100 % | 50 | - | - | - |
In stock
|
JP Fluid Control | 1/4 inch | Brass | 12 V DC | 13 | - | - | 13 | Inner thread cylindrical... | -10 | 120 | 0.2 | IP65 | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Direct | 0 | DIN-A | Straight | CS1 | FKM (FPM) | 100 % | 50 | - | - | - |
In stock
|
JP Fluid Control | 1/2 inch | Brass | 24 V DC | 10 | Teflon (PTFE) | Two-point | 3 | Inner thread cylindrical... | -10 | 110 | 8.6 | IP54 | 6 | 2.5 | 50 °C to 50 °C | With cogwheels | 12 | No | No | No | Untreated | EPDM | 67 | 120 | 84 | Yes | - | 3 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 1/4 inch | Brass | 24 V DC | 13 | - | - | 13 | Inner thread cylindrical... | -10 | 120 | 0.2 | IP65 | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Direct | 0 | DIN-A | Straight | CS1 | FKM (FPM) | 100 % | 50 | - | - | - |
In stock
|
JP Fluid Control | 1 inch | Brass | 230 V AC | 10 | Teflon (PTFE) | Two-point | 5 | Inner thread cylindrical... | -10 | 110 | 16 | IP54 | 16 | 4 | 50 °C to 50 °C | With cogwheels | 18 | No | No | No | Untreated | EPDM | 67 | 125 | 84 | - | 50 Hz | 5 | No | - | - | - | - | - | - | - | - | - | None | T-bore | - |
Solenoid Valve CM-DA 1/4'' compact brass FKM 0-10bar 12V DCCM-DA014B020F-012DC
In stock
|
JP Fluid Control | 1/4 inch | Brass | 12 V DC | 10 | - | - | 6 | Inner thread cylindrical... | -10 | 120 | 0.11 | IP65 | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Direct | 0 | DIN-B | Straight | CS4 | FKM (FPM) | 100 % | 50 | - | - | Energy efficient (under 9 VA) |
Solenoid Valve CM-DA 1/4'' compact brass FKM 0-13bar 230V ACCM-DA014B020F-230AC
In stock
|
JP Fluid Control | 1/4 inch | Brass | 230 V AC | 13 | - | - | 8 | Inner thread cylindrical... | -10 | 120 | 0.11 | IP65 | - | - | - | - | 2 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Direct | 0 | DIN-B | Straight | CS4 | FKM (FPM) | 100 % | 50 | - | - | Energy efficient (under 9 VA) |
In stock
|
JP Fluid Control | 1/2 inch | Brass | 12 V DC | 10 | Teflon (PTFE) | Two-point | 3 | Inner thread cylindrical... | -10 | 110 | 8.6 | IP54 | 6 | 2.5 | 50 °C to 50 °C | With cogwheels | 12 | No | No | No | Untreated | EPDM | 67 | 125 | 84 | Yes | - | 3 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 1/8 inch | Brass | 12 V DC | 13 | - | - | 13 | Inner thread cylindrical... | -10 | 120 | 0.2 | IP65 | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Direct | 0 | DIN-A | Straight | CS1 | FKM (FPM) | 100 % | 50 | - | - | - |
In stock
|
JP Fluid Control | 1 inch | Brass | 24 V DC | 10 | Teflon (PTFE) | Two-point | 3 | Inner thread cylindrical... | -10 | 110 | 26 | IP54 | 6 | 2.5 | 50 °C to 50 °C | With cogwheels | 20 | No | No | No | Untreated | EPDM | 67 | 125 | 84 | Yes | - | 3 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 3/4 inch | Brass | 24 V DC | 10 | Teflon (PTFE) | Two-point | 3 | Inner thread cylindrical... | -10 | 110 | 21 | IP54 | 6 | 2.5 | 50 °C to 50 °C | With cogwheels | 15 | No | No | No | Untreated | EPDM | 67 | 120 | 84 | Yes | - | 3 | No | - | - | - | - | - | - | - | - | - | - | - | - |
In stock
|
JP Fluid Control | 1/4 inch | Brass | 230 V AC | 13 | - | - | 17 | Inner thread cylindrical... | -10 | 120 | 0.2 | IP65 | - | - | - | - | 3 | - | - | - | - | - | - | - | - | - | - | - | - | Normally closed | Direct | 0 | DIN-A | Straight | CS1 | FKM (FPM) | 100 % | 50 | - | - | - |
oil & fuel technology | tameson.co.uk
For the most oils and fuels, a brass solenoid valve with FKM seals is a good choice. Solenoid valves can be direct or indirect operated. For indirect operated valves, a pressure difference is required across the inlet and outlet of typically 0.5 bar. In a closed circulating circuit, or a suction line, the differential pressure is usually too low. In this case, a (semi-)direct operated solenoid valve is recommended. Solenoid valves are suitable for clean liquids and gases. For contaminated media such as waste oil, other valve types such as (electric) ball valves, are more appropriate. Finally, solenoid valves are unsuitable for liquids with a high viscosity (higher than 50 Centistokes or mPa·s). Therefore, other valve types, such as electric ball valves, are better suited for viscous liquids such as heavy oils and fats.
