Collection:Water Solenoid Valve 12V

View Tameson’s selection of water solenoid valves 12V DC. The valves are normally closed (NC), meaning that when 12V DC is not applied the valves will be closed and prevent water from flowing through. When 12V DC is applied, they are fast acting and will open allowing water to flow from the inlet to the outlet (2/2-way). This category only contains brass housings and EPDM (Ethylene Propylene Diene Terpolymer) seals, which is ideal for water applications. Read below for additional product specification considerations.

Additional Water Solenoid Valve 12V Selection Criteria

The considerations for operating type are:

1. Direct Operated: Doesn’t require a pressure differential to function properly.
2. Indirect Operated: Requires a pressure differential (typically 0.5 bar) to function properly.
3. Semi-Direct Operated: A pressure differential isn’t required, but assists in the operation.

Note: Proper valve orientation of inlet and outlet is important for proper function. The correct orientation is denoted with an arrow on the valve housing.

This selection of valves are 2/2-way, and the inlet and outlet ports are both female. The available port sizes are:

• ⅛ inch
• ¼ inch
• ⅜ inch
• ½ inch
• ¾ inch
• 1 inch
• 1-¼ inch
• 1-½ inch
• 2 inch

All products shown have a brass housing and an EPDM seal material. Brass as a housing material is ideal as it is resistant to water (won’t rust) and is durable. EPDM as a seal material is ideal as it is suitable for water, good resistance to weather influences, and suitable up to a maximum temperature of 120 °C or 130 °C.

Are you looking for another solenoid valve type? Please take a look at our general solenoid valve category.