Sorry for the inconvenience.
No products found with current parameters. Try to reset filters.
G1/2'' 3-way T-bore Ball Valve Brass PTFE/NBR 50 bar - BL3BM
3-Way ball valve T-bore with G1/2 inch threads (F/F/F) and lever for open/close control. 14mm nominal diameter and max pressure 50 bar. For i.a. water, oil, air etc. Temperature range from -10 to 120°C. Nickel plated brass hard chromed ball and PTFE/NBR seals.
Order before 16:00 h, same day shipment
2 year warranty, Returns 14 days
3-Way (T-bore) ball valve of nickel plated brass from Tameson with G1/2 inch pipe threads (BSPP) and a nominal diameter of 14mm.
|Diagram||The ports overlap during rotation.|
|Ports||G1/2" BSP (F/F/F)|
|Housing||Nickel plated brass (CW 617N)|
|Ball||Hard chrome plated brass|
|Seals||PTFE (seal rings), NBR (O-rings)|
|Nominal Diameter||14 mm|
|Operation||Aluminium Lever (red)|
|Max pressure||50 bar|
|Temperature||-10°C .. 120°C|
The valve has female thread on all three ports (1/2 inch). This is BSPP (British Standard Pipe Parallel). With our range of 1/2" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 10 - 16 mm).
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the BL3BM series. The housing of the valve is made of nickel plated brass, the ball is made of hard chromed brass and the seals are made of PTFE/NBR. The valve is suitable for various media, such as water, oil or air up to a maximum of 50 bar. For corrosive or aggressive media, a valve made of plastic or stainless steel is better suited. The valve can be used up to a max pressure of 50 bar and a temperature between -10 and 120 °C.
HousingNickel plated brass