Brass Y-shaped strainer with G1/2 inch threads and stainless steel mesh. For media between -10°C and 100°C. Can be used in one flow direction.
Messing particle filter with ball valve. The threads 1/2 are located at an angle of 90 degrees, the filter (stainless steel) has a mesh size of 500µm. For media of -10°C to 100°C to an operating pressure of 40 bar. Suitable for solenoid valves.
Brass ball valve with particulate filter and 1/2" port threads at an angle of 90 degrees and 500µm mesh filter (stainless steel). For media between -10°C and 100°C. The residue collects in the filter. The ball valve can be operated manually and by unscrewing the sealing cap, the filter can be cleaned.
|Port threads||1/2 inch|
|Filter Housing||Brass (MS58)|
|Filter||Stainless steel (SS 304)|
|Filter mesh||500µm (35 mesh, 0.5mm)|
Solenoid valves only operate well in combination with clean liquids or gases. Therefore, it is recommended to install a filter before the solenoid valve. The filter can also be used for other applications.