end cap and plug fittings
Subcategories
| Product | Brand | Thread | Material | Fitting features | Connection type | Max pressure at 20 °C (bar) | Material quality connection 1 | With drain | Material connection 1 | Seal material | Min temperature (°C) | Max temperature (°C) | Surface protection connection 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
G 1/4'' Stainless steel Closing plug with Inner Hex 40 BarFL1-M-S-014G-I
+2 days
|
Tameson | 1/4 inch | Stainless steel | Capped | Outer thread cylindrical... | 40 | Stainless steel 316 (1.4401) | No | Stainless steel | - | - | - | - |
G 1 1/4'' Brass Closing plug with Inner Hex 16 BarFL1-M-B-114G-I
In stock
|
Tameson | 1 1/4 inch | Brass | Capped | Outer thread cylindrical... | 16 | - | No | Brass | - | - | - | - |
In stock
|
Tameson | M42 x 2 | Steel | - | Outer thread metric | 250 | - | No | Steel | NBR (nitrile rubber) | -35 | 100 | Galvanic zink plated |
G 2'' Brass End cap 16 BarFL1-F-B-200G-E
In stock
|
Tameson | 2 inch | Brass | Capped | Inner thread cylindrical... | 16 | - | No | Brass | - | - | - | - |
£5.87
In stock
|
Tameson | 1 1/2 inch | Malleable cast iron | - | Outer thread conical BSPT-R | 25 | - | No | Malleable cast iron | - | - | - | Galvanic zink plated |
G 1 1/4'' Brass End cap 16 BarFL1-F-B-114G-E
In stock
|
Tameson | 1 1/4 inch | Brass | Capped | Inner thread cylindrical... | 16 | - | No | Brass | - | - | - | - |
3/4'' NPT Male Stainless steel Closing plug with Outer...FL1-M-SH-034N-E
+2 days
|
Tameson | 3/4 inch | Stainless steel | Capped, Hydraulic | Outer thread conical (NPT) | 16 | Stainless steel 316 (1.4408) | No | Stainless steel | - | - | - | - |
Rp 2'' Zinc plated Cast iron End cap 25 BarFL1-F-IZ-200R-E
+2 days
|
Tameson | 2 inch | Cast iron | Capped | Inner thread cylindrical... | 25 | Malleable cast iron | No | Cast iron | - | - | - | Galvanic/electrolytic zinc... |
1'' Brass Closing plug with Inner Hex without collar 16 BarFL1-M-B-100R-I-W
+2 days
|
Tameson | 1 inch | Brass | Capped | Outer thread conical BSPT-R | 16 | - | No | Brass | - | - | - | - |
1/2'' NPT Male Zinc plated Steel Closing plug with Outer...FL1-M-EZ-012N-E
+2 days
|
Tameson | 1/2 inch | Steel | Capped | Outer thread conical (NPT) | 210 | - | No | Steel | - | - | - | Galvanic/electrolytic zinc... |
M10x1 Stainless steel Closing plug with Inner Hex without...FL1-M-S-M10-I-W-C
+2 days
|
Tameson | M10 x 1 | Stainless steel | Capped | Outer thread metric (Conical) | 40 | Stainless steel 316 (1.4401) | No | Stainless steel | - | - | - | - |
1/4'' NPT Zinc plated Steel Closing plug with Outer Hex...FL1-F-EZ-014N-E
+2 days
|
Tameson | 1/4 inch | Steel | Capped, Hydraulic | Inner thread conical (NPT) | 275 | - | No | Steel | - | - | - | Galvanic/electrolytic zinc... |
1'' NPT Male Stainless steel Closing plug with Outer Hex...FL1-M-SH-100N-E
+2 days
|
Tameson | 1 inch | Stainless steel | Capped, Hydraulic | Outer thread conical (NPT) | 16 | Stainless steel 316 (1.4408) | No | Stainless steel | - | - | - | - |
+2 days
|
Tameson | UNF 7/8 inch-14 | Stainless steel | - | Outer thread flare (UNF) | 630 | 1.4571 | No | Stainless steel | FKM (FPM) | -25 | 250 | - |
G 1/2'' Stainless steel Closing plug with Inner Hex...FL1-M-ST-012G-I-W
+2 days
|
Tameson | 1/2 inch | Stainless steel | Capped | Outer thread cylindrical... | 40 | Stainless steel 316 Ti... | No | Stainless steel | - | - | - | - |
end cap and plug fittings
View Tameson's range of end cap and plug fittings. End caps, also called end plugs, only have 1 port. Therefore, they are used to close off ports for permanent setups or for maintenance, inspection, or repairs. A practical example of using a plug is to close off unused ports in a manifold block. It is important to know your media to properly select the right material. Common materials are brass, stainless steel, nickel-plated brass, and cast iron. They can have either male or female threads to attach to the system. They can have either a hex nut or hex socket design.
