Float switch (Mac5-series) is ideally suited to control the level of a tank, a reservoir or a pond. It includes a 20 meter cable. The switch can be used for normally open (NO) or normally closed (NC) operation. The switch is suitable for a max nominal current of 3 A at 250V AC.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
This float switch of the brand MAC3 is ideally suited to control the level of a tank, a reservoir or a pond. Mac5 series is suitable for use in sewage water, in industrial waste water and in tumultuous water. The switch comes with a 20 meter cable and a counterweight is already built into the body of the float. The smallest controllable level change is approximately 20 cm. The device switches at an angle of about 45 degrees. The switch can be used for normally closed (NC) or normally open (NO) operation. It can be used to switch a pump or an alarm and has an IP68 rating.
Please read the manual carefully before connecting the float switch.
System of water supply: filling and emptying of a tank capacity. The float switch shuts off the pump that fills the tank when it pops up (the tank will be full) and turns it back on when it sinks to the bottom (the tank will be empty). The float switch gives the signal to open or close the valves when a certain limit is reached.
The Mac5 level regulator from MAC3 allows electrical equipment to start and stop automatically (usually pumps, storage tanks, alarms, electric control valves etc.). The Mac5 is a dual purpose float switch, intended for use in both clean and dirty water. Its principal feature is the heavy body which is free of any irregularity what makes this switch ideal for use in sewage water, industrial waste water (with agglomearate residues) and in tumultuous water. The polypropylene body of the Mac5 level regulator is made with a double liquid proof chamber and a counterweight built into the body of the float. Some models are ATEX certified up to Ex-zone 2.