-0.85 to -0.15bar SPDT Zinc Die-Cast Vacuum Switch Flange 250VAC DIN-A Connector

-0.85 to -0.15bar SPDT Zinc Die-Cast Vacuum Switch Flange 250VAC DIN-A Connector
-0.85 to -0.15bar SPDT Zinc Die-Cast Vacuum Switch Flange 250VAC DIN-A Connector
Image may vary slightly
See specifications for accurate information.
Reference: VDS-1-000-4-1
Brand: Barcontrol

This vacuum switch with changeover contacts and setting pressure range from -0.85 to -0.15 bar (-12 to -2 psi) is made in a diaphragm design. The switch hysteresis is 100 - 250 mbar. The pressure switch is made from zinc die-cast and with an NBR seal. It has a switch capacity of 3 A @ 24 V DC or 6 A @ 250 V AC and can be mounted using a flange 5.3x20 port.

View all
Regular price
£70.45
excl VAT

In stock +2 days On request On request
0 are currently in your cart. For orders exceeding 0, expect an increased lead time of 2 days. Up to 1 items available for online order. For higher quantities, please contact us on support@tameson.com to request the lead time. The item is not available for online order, please contact us on support@tameson.com to request the lead time.


Shipping to United Kingdom: £6.95
Free for orders > £75.00
Expected delivery in 4 - 6 business days

Description
Specifications
Downloads

This is a mechanical vacuum switch with changeover (SPDT (single pole, double throw)) contacts. They are composed of a normally closed contact pair and a normally open contact pair. The setpoint is the pressure value where the switch activates and the reset point is the value at which the switch deactivates when the pressure decreases. The setpoint can be adjusted between -0.85 and -0.15 bar (-12 and -2 psi). The maximum overpressure is 20 bar (290 psi). It has a switch hysteresis (the difference between setpoint and reset point) of 100 - 250 mbar. The switching capacity for this pressure switch is 3 A @ 24 V DC or 6 A @ 250 V AC. It can be connected to an electrical network with a DIN-A connector. This vacuum switch is made in a diaphragm design with a zinc die-cast body and an NBR seal. It is suitable for various media, such as compressed air, hydraulic oil, water and in a temperature range from -20 to 80°C (from -4 to 176°F). It has a flange 5.3x20 port. The vacuum switch has an IP65 rating.

Pros:

  • A mechanical pressure switch doesn't need a power supply
  • Long working life and stable operation
  • Set the pressure setpoint easily and precisely with the adjustment wheel

Cons:

  • The accuracy of mechanical pressure switches is lower than that of electronic pressure switches
  • Electronic pressure switches are better suited for process control where several switch points, the stability and flexibility of the control are important

PSL series

Tameson offers a wide range of mechanical and electronic pressure switches. The mechanical pressure switches are available with three different types of contacts: normally open (NO), normally closed (NC) and changeover contacts. The setting pressure is typically adjusted with a hex key or turning knob. The electronic pressure switches have a digital display to set up the switching function. Electronic switches often combine the function of a pressure transducer with a 0-10 V, 4-20 mA or digital output signal. The setting pressure range for these pressure switches is from -1 to 600 bar (from -14 to 8702 psi) and overpressure safety of up to 600 bar (8702 psi) can be attained. Hysteresis is the difference between the switch point and the reset point. Mechanical switches have a hysteresis in the range of 10-30% while electronic switches are often configurable. Choose from a wide range of switch capacities. Please note that maximum load is dependent on voltage and different loads are allowed for AC or DC voltage. Electronic pressure switches require power supply to function. Choose from brass, steel or stainless steel options with various sealing materials to be compatible with your medium and temperatures. Check our chemical resistance table when in doubt. Furthermore, choose from a wide range of options such as mounting standards, electrical connections, ATEX approvals and more.