pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and... Read more Read more

Product Brand Volume (ml) Max temperature (°C) Min temperature (°C) Four-ball test rig (welding load) (N) Net weight (g) Press-fit test
Ceramic Paste for Heavily...
+2 days
OKS 250 100 -30 3400 - -
Aluminum Paste Anti-seize...
+2 days
OKS - 1100 -30 - 250 -
Antiseize Copper Paste 75ml...
+2 days
OKS 75 200 -30 2800 - 0.12
White High-temperature...
+2 days
OKS - 160 -30 - 1000 0.12
Chuck Jaw Paste 400ml OKS 265
+2 days
OKS 400 110 -45 4200 - -
Heat Sink Paste 500g OKS 1103
+2 days
OKS - 180 -40 - 500 -
Ceramic Paste for Heavily...
+2 days
OKS 150 100 -30 3400 - -
Insulating Paste 500g OKS 1105
+2 days
OKS - 200 -40 - 500 -
Antiseize Copper Paste...
+2 days
OKS 400 200 -30 2800 - 0.12
Antiseize Copper Paste 8ml...
+2 days
OKS 8 200 -30 2800 - 0.12
Antiseize Copper Paste 250g...
+2 days
OKS - 200 -30 2800 250 0.12
White Allround Paste...
+2 days
OKS 80000 200 -40 3600 - 0.1
Assembly Paste MoS2 40ml...
+2 days
OKS 40 450 -35 2400 - 0.09
Assembly Paste MoS2 250g...
+2 days
OKS - 450 -35 2400 250 0.09
Aluminum Paste Anti-seize...
+2 days
OKS - 1100 -30 - 1000 -
pastes

pastes

The structure of pastes is similar to that of greases. However, the share of solid lubricants is significantly higher. This ensures reliable lubrication, separation and corrosion protection, also when used under extreme temperature and pressure conditions and with aggressive media. Besides screwed connections, pastes are also used for pressing in pins and bolts and for gear wheels.

Characteristics of pastes:

  • Press-fit test - Determines the lubricating effect of pastes at very high pressures and low slide speeds (relevant for assembly pastes).
  • Thread friction coefficient according to DIN EN ISO 16047 - Specifies a measurement of friction when screws and nuts are tightened (relevant for screw pastes).
  • Breakaway torque according to DIN 267-27 - Ratio of the required breakaway torque when loosening the screwed connection to the tightening torque.
  • Operating temperature - Temperature range of the optimal performance.