Cast iron 

Cast iron

Tameson has a large selection of 2/2-way cast iron solenoid valves, which have 2 ports (1 inlet and 1 outlet) and 2 switching states (open or closed) that are electromechanically controlled. They are used to solely start/stop the flow of the media and are most commonly normally closed (power to open), so that if power fails the valve will close. They can also be designed as normally open (power to close) or bi-stable (latching). There is a wide array of selection criteria from orifice size, connection type, voltage, pressure range, operation, design, certification, seal material, and housing material to ensure you have the correct valve for your application. We have port sizes between 1/8” to 2” to cover the majority of applications, but for applications outside of this we also have you covered. AC or DC voltage coils are available depending on the electrical wiring available in the application. View our pressure ranges along with different solenoid valve operation types (direct, semi-direct, or indirect), as this will affect if you need a pressure differential for complete valve opening. If needed, we also have different versions, for example, medium separated, ATEX certified, or oil and fat free to meet your application requirements. The valve’s housing and sealing material will ultimately affect the type of media that can flow through the valve, but it is typically either gases or clean liquids. Please note that the internal parts of the solenoid valve are made of different materials (usually stainless steel 430F for the plunger). Medium separated valves separate these parts from the fluid. A solenoid valve is often selected due to good sealing properties, fast response time of typically between tenths to hundreds of milliseconds, durability, reliability, and a wide range of operation types and materials to find the right one for your application. The cast iron housing allows for neutral media and is often used for larger installations. View our chemical resistance chart to ensure that your housing and seal material are suitable for your media.

There are 12 products.
Showing 1 - 12 of 12 items

Bürkert 2/2-way solenoid valve (type 5282) with DN25 flange and a 24V DC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 90°C at a differential pressure of 0.2-10 bar. Housing of cast iron...

£ 426.99  (£ 516.66 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 5282) with DN50 flange and a 24V DC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 90°C at a differential pressure of 0.2-16 bar. Housing of cast iron...

£ 779.99  (£ 943.79 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 5282) with DN50 flange and a 230V AC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 80°C at a differential pressure of 0.2-10 bar. Housing of cast iron...

£ 672.99  (£ 814.32 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 5282) with DN50 flange and a 24V DC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 80°C at a differential pressure of 0.2-10 bar. Housing of cast iron...

£ 672.99  (£ 814.32 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 5282) with DN40 flange and a 230V AC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 80°C at a differential pressure of 0.2-10 bar. Housing of cast iron...

£ 539.99  (£ 653.39 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 5282) with DN32 flange and a 230V AC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 80°C at a differential pressure of 0.2-10 bar. Housing of cast iron...

£ 473.99  (£ 573.53 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 5282) with DN25 flange and a 230V AC coil. NC (default) and NO setup are both possible and indirect operating, so a small differential pressure required. Suitable for slightly contaminated and aggressive media (media separation). For media with max 80°C at a differential pressure of 0.2-10 bar. Housing of cast iron...

£ 377.99  (£ 457.37 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 0290) with DN32 flange and a 230V AC coil. Normally closed (voltage = open) and semi-direct operating, so no differential pressure required. For media with max 120°C at a differential pressure of 0-12 bar. Housing of cast iron (GG25) with EPDM sealing and a 32 mm orifice. The Kv-value is 16 m3/h (266.67 l/min at dp=1...

£ 487.99  (£ 590.47 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 0290) with DN50 flange and a 24V DC coil. Normally closed (voltage = open) and semi-direct operating, so no differential pressure required. For media with max 80°C at a differential pressure of 0-12 bar. Housing of cast iron (GG25) with NBR sealing and a 50 mm orifice. The Kv-value is 38 m3/h (633.33 l/min at dp=1 bar...

£ 683.99  (£ 827.63 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 0290) with DN50 flange and a 230V UC coil. Normally closed (voltage = open) and semi-direct operating, so no differential pressure required. For media with max 90°C at a differential pressure of 0-12 bar. Housing of cast iron (GG25) with EPDM sealing and a 50 mm orifice. The Kv-value is 38 m3/h (633.33 l/min at dp=1...

£ 723.99  (£ 876.03 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 0290) with DN50 flange and a 230V UC coil. Normally closed (voltage = open) and semi-direct operating, so no differential pressure required. For media with max 90°C at a differential pressure of 0-12 bar. Housing of cast iron (GG25) with FKM sealing and a 50 mm orifice. The Kv-value is 38 m3/h (633.33 l/min at dp=1 bar...

£ 759.99  (£ 919.59 tax incl.)
Request lead time
Out of stock
Out of stock

Bürkert 2/2-way solenoid valve (type 0290) with DN50 flange and a 230V UC coil. Normally closed (voltage = open) and semi-direct operating, so no differential pressure required. For media with max 80°C at a differential pressure of 0-12 bar. Housing of cast iron (GG25) with NBR sealing and a 50 mm orifice. The Kv-value is 38 m3/h (633.33 l/min at dp=1 bar...

£ 704.99  (£ 853.04 tax incl.)
Request lead time
Out of stock
Out of stock
Thumbnail Product
Down up
Price
Down up
Operation
Down up
Function
Down up
Voltage
Down up
Port
Down up
Seal
Down up
Min pres (bar)
Down up
Max pres (bar)
Down up
Kv (m3/h)
Down up
Orifice (mm)
Down up
State
Down up
Housing
Down up
Max temp (°C)
Down up
Power
Down up
Connector
Down up
Series
Down up
IP
Down up
Flange DN25 Cast iron (GG25) 24VDC Solenoid Valve 5282 206166

206166

£ 426.99   (£ 516.66 tax incl.)

Request lead time

Indirect 2/2 way 24V DC DN 25 EPDM 0.2 10 10 25 Normally closed Cast Iron (GG25) 90 8W DIN - A 5282 IP65
Flange DN50 Cast iron (GG25) 24VDC Solenoid Valve 5282 202994

202994

£ 779.99   (£ 943.79 tax incl.)

Request lead time

Indirect 2/2 way 24V DC DN 50 EPDM 0.2 16 40 50 Normally closed Cast Iron (GG25) 90 8W DIN - A 5282 IP65
Flange DN50 Cast iron (GG25) 230VAC Solenoid Valve 5282 134553

134553

£ 672.99   (£ 814.32 tax incl.)

Request lead time

Indirect 2/2 way 230V AC DN 50 NBR 0.2 10 40 50 Normally closed Cast Iron (GG25) 80 15VA DIN - A 5282 IP65
Flange DN50 Cast iron (GG25) 24VDC Solenoid Valve 5282 134550

134550

£ 672.99   (£ 814.32 tax incl.)

Request lead time

Indirect 2/2 way 24V DC DN 50 NBR 0.2 10 40 50 Normally closed Cast Iron (GG25) 80 8W DIN - A 5282 IP65
Flange DN40 Cast iron (GG25) 230VAC Solenoid Valve 5282 134549

134549

£ 539.99   (£ 653.39 tax incl.)

Request lead time

Indirect 2/2 way 230V AC DN 40 NBR 0.2 10 20 40 Normally closed Cast Iron (GG25) 80 15VA DIN - A 5282 IP65
Flange DN32 Cast iron (GG25) 230VAC Solenoid Valve 5282 134545

134545

£ 473.99   (£ 573.53 tax incl.)

Request lead time

Indirect 2/2 way 230V AC DN 32 NBR 0.2 10 20 32 Normally closed Cast Iron (GG25) 80 15VA DIN - A 5282 IP65
Flange DN25 Cast iron (GG25) 230VAC Solenoid Valve 5282 134541

134541

£ 377.99   (£ 457.37 tax incl.)

Request lead time

Indirect 2/2 way 230V AC DN 25 NBR 0.2 10 10 25 Normally closed Cast Iron (GG25) 80 15VA DIN - A 5282 IP65
Flange DN32 Cast iron (GG25) 230VAC Vacuum Solenoid Valve 0290 122004

122004

£ 487.99   (£ 590.47 tax incl.)

Request lead time

Semi-direct 2/2 way 230V AC DN 32 EPDM 0 12 16 32 Normally closed Cast Iron (GG25) 120 32VA DIN - A 0290 IP65
Flange DN50 Cast iron (GG25) 24VDC Vacuum Solenoid Valve 0290 120350

120350

£ 683.99   (£ 827.63 tax incl.)

Request lead time

Semi-direct 2/2 way 24V DC DN 50 NBR 0 12 38 50 Normally closed Cast Iron (GG25) 80 30W DIN - A 0290 IP65
Flange DN50 Cast iron (GG25) 230VUC Vacuum Solenoid Valve 0290 78182

78182

£ 723.99   (£ 876.03 tax incl.)

Request lead time

Semi-direct 2/2 way 230V AC/DC DN 50 EPDM 0 12 38 50 Normally closed Cast Iron (GG25) 90 30VA DIN - A 0290 IP65
Flange DN50 Cast iron (GG25) 230VUC Vacuum Solenoid Valve 0290 77090

77090

£ 759.99   (£ 919.59 tax incl.)

Request lead time

Semi-direct 2/2 way 230V AC/DC DN 50 FKM 0 12 38 50 Normally closed Cast Iron (GG25) 90 30VA DIN - A 0290 IP65
Flange DN50 Cast iron (GG25) 230VUC Vacuum Solenoid Valve 0290 77008

77008

£ 704.99   (£ 853.04 tax incl.)

Request lead time

Semi-direct 2/2 way 230V AC/DC DN 50 NBR 0 12 38 50 Normally closed Cast Iron (GG25) 80 30VA DIN - A 0290 IP65
Showing 1 - 12 of 12 items