No products found

Sorry for the inconvenience.

No products found with current parameters. Try to reset filters.

No products found.
Electrical Ball Valve BW3 1'' 3-way 24V DC 3-point
BW3-100-AW1-024DC
£79.79
£96.55 incl vat
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
Electrical Ball Valve BW3...
1 / 10
Electrical Ball Valve BW3...
2 / 10
Electrical Ball Valve BW3...
3 / 10
Electrical Ball Valve BW3...
4 / 10
Electrical Ball Valve BW3...
5 / 10
Electrical Ball Valve BW3...
6 / 10
Electrical Ball Valve BW3...
7 / 10
Electrical Ball Valve BW3...
8 / 10
Electrical Ball Valve BW3...
9 / 10
Electrical Ball Valve BW3...
10 / 10

Electrical Ball Valve BW3 1'' 3-way 24V DC 3-point

BW3-100-AW1-024DC

3 way electrical ball valve with 1 inch female threads (BSP) and energy efficient 24V DC actuator. Suitable for liquids and gases (max 110°C) and a pressure from 0-10 bar. Suitable as zone valve in heating systems. The valve has a brass housing with chromed ball and PTFE valve seats. The nominal diameter is 18mm, the Kv value is 16m3/h (266.7 l/min at dP=1 bar, water). 3-wire connection (3-point): neutral wire and 2 control wires (to open/close). The valve opens in 6s.

Including actuator
View all
£96.55 incl VAT info info
£79.79 excl VAT
In stock

Shipping to:

Estimate based on cart value including this product quantity.
Track & Trace Free
UPS Access Point 2 - 3 day(s) transit Free

Order before 16h CEST (mo-fr), same day shipment

2 year warranty, Returns 30 days


Customers rate us: 9.32 / 10 111 reviews
Customers rate us:

Description

Very energy efficient and robust 3 way JP Fluid Control electric ball valve to open or close pipes electrically. The valve has 1 inch threads (female thread BSPP) and a 24V DC actuator (IP54). This valve is suitable for liquids and gases (-10 to 110°C) and is often used in heating systems. A ball valve is less sensitive to dirt than a solenoid valve. It is however recommended to install a filter before the valve. The valve body is made of brass, the ball is chrome plated and the seal is PTFE (Teflon). The orifice is 18 mm, the Kv-value is 16 (266.7 l/min at dP=1 bar). The time for opening or closing is approximately 6 seconds.

Installation

The actuator has a 3-wire connection, and must be connected as shown in the diagram below. The actuator is supplied with a cable. The actuator has 3-point control. One wire is permanently connected to the minus. The other two wires are control wires to rotate the ball in both directions (connect to the plus). Please note: never connect the two control wires at the same time, this could damage the actuator! The actuators can be supplied with an integrated relay (On-Off control), in that case only one control wire is needed. The actuator includes limit switches, energy is only consumed during opening or closing of the valve.

The 3-way valves can be connected in two different ways as shown in the schematic below.

Important

  • Please observe the color coding of the wires. Never connect the two control wires at the same time, the actuator will be damaged.
  • Suitable for clean gases and liquids, including cold & hot water.
  • Make sure that the valve is suitable for the application and that the materials are suitable for the medium and the temperature.

Specification

  • Port
    1 inch
  • Voltage
    24V DC
  • Seal
    PTFE
  • Housing
    Brass
  • Function
    3 way
  • Operation
    3-point
  • Min pres
    0
  • Max pres
    10
  • T/L Port
    T-bore
  • Kv
    16
  • Orifice
    18
  • Max temp
    110
  • Power
    3W
  • Series
    BW
  • IP
    IP54
  • Torque
    2.5
  • Min temp
    -10

Downloads

CAD bw3-100-aw1.zip zip Download save_alt
Manual BW (NL) pdf Download save_alt
Manual BW (EN) pdf Download save_alt
Safety instructions pdf Download save_alt

Accessories

R1''(M) x G3/4'' (F) reducer bushing
20809
In stock
Price £5.98 £7.23 incl vat
R1''xR1'' nipple
20007
In stock
Price £6.17 £7.46 incl vat
25mmxG 1'' Hose barb male thread
401053
In stock
Price £7.73 £9.36 incl vat
Thread sealant Loxeal Blue (50ml)
5503050LOXEAL
In stock
Price £12.82 £15.51 incl vat
G1''x22mm Compression Fitting WRAS
CFM22100
In stock
Price £4.55 £5.51 incl vat
G1''x28mm Compression Fitting WRAS
CFM28100
In stock
Price £5.31 £6.43 incl vat
G1''xG3/4'' Adapter Nipple M/M
RNM100034
In stock
Price £1.94 £2.34 incl vat
G1-1/4''xG1'' Adapter Nipple M/M
RNM114100
In stock
Price £3.41 £4.13 incl vat
G1-1/2''xG1'' Adapter Nipple M/M
RNM112100
In stock
Price £4.84 £5.85 incl vat