Sorry for the inconvenience.
No products found with current parameters. Try to reset filters.
BMP - 2-Way PVC Ball Valve True Union G3/4''
2-Way ball valve with G3/4 inch threads (F/F) and lever for open/close control. 20mm nominal diameter and max pressure 16 bar. Temperature range from -10 to 60°C. PVC housing with PVC ball, PE seat rings and EPDM O-rings.
Order before 16h CEST (mo-fr), same day shipment
2 year warranty, Returns 30 days
2-Way ball valve of pvc from Tameson with 3/4 inch threads on both ends. The valve can be easily installed or removed thanks to the true union design. The valve has a full bore (20 mm). The valve has a red handle for manual control.
|Ports||G3/4" BSP (F/F)|
|Seals||PE (seal rings), EPDM (O-rings)|
|Nominal Diameter||20 mm (full bore)|
|Kv value||45 m3/h|
|Operation||PVC Lever (red)|
|Max pressure||16 bar|
|Temperature||-10°C .. 60°C|
The valve has female thread on both sides (3/4 inch). This is BSPP (British Standard Pipe Parallel). With our range of 3/4" fittings, the valve can be installed in any pipe (recommended pipe diameter ± 15 - 22 mm). This is a double union ball valve (or true union). This means that the valve can easily be removed from the piping for inspection or replacement.
This ball valve can be manually operated by a lever. By rotating 90 degrees, the valve is open or closed. If the lever is perpendicular to the pipe, the valve is closed. This valve is not suitable for electrical or pneumatical control. For this purpose, valves with ISO-Top flange (ISO 5211) are recommended.
This ball valve is part of the BMP series. The housing of the valve is made of pvc, the ball is made of pvc, de seat rings are made of PE and the O-rings are made of EPDM. The valve is suitable for various media and is often used in applications such as irrigation, swimming pools, water supply and drainage. The valve can be used up to a max pressure of 16 bar and a temperature between -10 and 60 °C.