12V DC Solenoid Valve Welding 4mm Hose Barb
Notice: This product is discontinued
Premium brass solenoid valve to control the supply of shielding gases (such as argon and CO2) for MIG or TIG welding devices. The valve is normally closed and opens with a voltage of 12V DC. Complete delivery including DIN-connector, 2 hose barbs for hoses with ID=4mm and a free teflon tape spool.
Notice: This product is discontinued
Description
This solenoid valve of JP Fluid Control is suitable for most MIG / MAG and TIG welding devices and comes with two 4mm hose barbs and a 12V DC coil. The valve controls the supply of various shielding gases, such as argon, helium or CO2. The valve is normally closed and opens with an electrical voltage over the coil. The current through the coil generates a magnetic field and attracts an internal ferromagnetic plunger. This opens an orifice, allowing the gas to flow. This solenoid valve of JP Fluid Control is easy to install and is characterized by a low power consumption (6W) and a long life span.
This valve is available with a wide range of voltages, such as 12V DC, 24V DC, 24V AC, 120V AC and 230V AC. In addition, other pipe/hose connections are possible, such as 6mm and 8mm hose barbs and push fittings.Main features
- Suitable for all standard MIG / MAG and TIG welding machines.
- For use with 12V DC and hoses with an inner diameter of 4mm.
- Trusted quality with solid construction.
- Complete delivery including fittings, DIN connector and free roll teflon tape.
- Very low power consumption.
Installation Tips
- Don't energize the coil when it's not mounted to the valve, it may burn out.
- Make sure that no dirt can get into the valve, solenoid valves are particularly sensitive to dirt.
- Make sure the gas flows from port 1/IN to port 2/OUT.
Technical specifications
| Parameter | Value |
|---|---|
| Hose connection | Hoses with an inner diameter of 4mm |
| Voltage | 12V DC power supply |
| Power | 6W |
| Duty Cycle | 100% ED (suitable for continuous use) |
| Housing | Brass |
| Orifice | 2 mm |
| Seal | EPDM |
| Pressure | 0 - 10 bar (145 psi) |
| Connector | DIN - B |
| Kv value | 0.11m3/h |
| Compatible with | Shielding gases such as Argon, Helium, CO2, nitrogen, hydrogen gas, oxygen |
Standard included
- Solenoid valve (CM-DA018B020E)
- Coil including DIN connector (CS4-012DC)
- 2x Hose barb (FL2S-MH-B-018G-04-I)
- Teflon tape (AA-TT)
