V-Belt Size Calculator
Figure 1: A v-belt
A v-belt is a transmission belt made of rubber polymer with a trapezoidal cross-section. These belts install around multiple groove pulleys for higher torque transmissions. Industrial motors, agricultural, textile machinery, and mining applications use v-belts. They are easy to select, simple to install, and offer years of reliable performance. This article discusses the basics of a v-belt and calculating the belt length of a two-pulley system.
Table of contents
- What is a v-belt pulley system?
- How to measure a v-belt length of a two-pulley system
- Alternate formula to calculate belt length
- V-belt length chart
- FAQs
View our online selection of V-belts
What is a v-belt pulley system?
To learn more about v-belts, read our v-belt overview article.
A pulley is a wheel with one or more wedged grooves on its surface. It transfers motion and power using a cable or belt in its track. A belt drive is a popular power transmission method. It transmits power between multiple shafts using pulleys and elastic belts (e.g., v-belts).
A v-belt effectively links a power drive to a needed function. A v-belt drive’s typical application is for two pulleys near one another, which allows for compact construction. The wedge-shaped belt fits perfectly into the pulley’s wedged groove to create a matched fit. Due to this match, v-belts have tremendous gripping power, and they can transmit more force than flat belts.
The disadvantage of v-belts is efficiency. V-belts are about 2.5-3.0% less efficient than flat belts. Flat belts have this extra efficiency because they have a thin cross-section and, therefore, lower losses from bending.
How to measure a v-belt length of a two-pulley system
Measuring v-belts is a common task to replace v-belts that show signs of wear and tear. Use the following formula as a v-belt length calculator for a v-belt in a two-pulley system with different pulley diameters:
- D_{l}: Diameter of the larger pulley (mm, in)
- D_{s}: Diameter of the smaller pulley (mm, in)
- L: Distance between the pulleys’ axles (mm, in)
The above formula can also calculate the distance between the pulley axles if the v-belt length and pulley diameters are known.
Figure 2: Diameters of a two-pulley system (D_{l} and D_{s}) and distance between the pulleys’ axles (L).
For example, consider calculating v-belt sizes in a factory. In one instance, the diameters of the pulleys are 200 mm and 120 mm, respectively, and the distance between the pulley axles is 1300 mm.
- D_{l} = 200 mm
- D_{s} = 120 mm
- L = 1300 mm
Substituting these values in the formula for belt length:
=3.1m / 3100 mm
Use this equation when:
- Accuracy is crucial: This formula provides a precise calculation of the belt length, accounting for the difference in diameters of the pulleys and the distance between them.
- Pulleys have significantly different sizes: The equation factors in the size disparity between the pulleys, making it ideal for systems where one pulley is much larger than the other.
- The pulleys are relatively close together: The detailed calculation includes the arcs in function to accurately account for the geometry of the belt path when the pulleys are not far apart.
This equation is best suited for applications where precision is key, and the system configuration does not conform to the assumptions made by simpler models.
Sizing v-belts correctly for a pulley system is critical. If the chosen v-belt size is larger than the necessary value, the belt tends to be loose. A loose belt causes slippage along with wearing out of the pulleys. If the chosen length is less than the necessary value, excess tension and strain on the belt, shafts, and bearings cause premature wear of these components. Learn more by reading our v-belt tensioning article.
Alternate formula to calculate belt length
Calculating v-belt length can be simpler. An approximation of the above formula is given below, which can also calculate the belt length in a two-pulley system:
Where:
- D_{l}: Diameter of the larger pulley (mm, in)
- D_{s}: Diameter of the smaller pulley (mm, in)
- L: Distance between the axles of the pulleys (mm, in)
This equation for belt length approximates the original equation. It is convenient because it doesn’t hold complex computations like square roots or inverse trigonometric functions.
Use this equation when:
- Quick estimations are needed: This formula allows for faster calculations with a reasonable level of accuracy, suitable for initial planning or when precise measurements are not critical.
- Pulleys are of similar size or far apart: The simplified equation works well when the difference in pulley sizes is not extreme or when the pulleys are spaced at a greater distance. Under these conditions, the impact of the exact path of the belt around the pulleys is less significant.
- High precision is not required: For applications where an approximate belt length is sufficient, this equation provides a convenient and quick solution without the complexity of trigonometric functions.
This simplified model is particularly useful during the design phase or when engineers need to make quick decisions without access to detailed calculations or a belt length calculator.
V-belt length chart
When determining the size of a v-belt is a common task, it is useful to have a v-belt length chart on hand. The chart helps users understand the labels on a v-belt and quickly determine its length. Such a chart is available in our v-belt size chart article.
FAQs
How are v-belts measured?
If a v-belt is connected to a belt drive and the following is known: the diameter of each pulley and distance between pulleys, a v-belt is measured using an equation. If a v-belt is not on a pulley system, it can be measured using a measuring tape.
How is the distance between two pulleys measured?
On a v-belt drive, if the diameter of each pulley is known, as well as the length of the v-belt, the distance between the pulley axles is calculated using a formula.