Electric Butterfly Valve DN125 24-240V AC/DC Lug GGG40 FKM J+J

Electric Butterfly Valve DN125 24-240V AC/DC Lug GGG40 FKM J+J
Electric Butterfly Valve DN125 24-240V AC/DC Lug GGG40 FKM J+J
Electric Butterfly Valve DN125 24-240V AC/DC Lug GGG40 FKM J+J
Electric Butterfly Valve DN125 24-240V AC/DC Lug GGG40 FKM J+J
Image may vary slightly
See specifications for accurate information.
Reference: V2SEZ
Brand: Tameson
This electrical actuator is offered in combination with a cast iron butterfly valve. Actuator requires 24-240 V AC/DC to operate. The butterfly valve
View all
Note: product cannot be returned
£2,662.02
excl VAT
In stock +2 days On request On request
0 are currently in your cart. For orders exceeding 0, expect an increased lead time of 2 days. Up to 1 items available for online order. For higher quantities, please contact us on support@tameson.com to request the lead time. The item is not available for online order, please contact us on support@tameson.com to request the lead time.
Shipping to United Kingdom: Free
Free for orders > £75.00
Expected delivery in 4 - 6 business days

Customers rate us: 4.81 / 5

394 reviews at TrustedShops

Description
Specifications
Downloads

Description

This electrical actuator is offered in combination with a butterfly valve. It can turn the valve from 0-90 degrees in a time of 34 seconds. It requires a supply voltage of 24-240 V AC/DC has a duty cycle of 75%, and comes with a visual positioning indicator on top of the unit to clearly see valve position. The butterfly valve has a lug type flange for connecting it to the piping, a nominal diameter of DN 125, and is rated up to 6 bar (87.0 psi) for non-hazardous fluids. Please note that the maximum pressure may deviate based on the medium type, so carefully check the datasheet. The butterfly valve has a cast iron GGG 40 housing, stainless steel disc and an FKM seal. It is suitable for media temperatures between 5 and 180 °C (41 and 356 °F). The actuator has a IP67 degree of protection and is suitable for an environmental temperature of -20 to 70 °C (-4 and 158 °F).

Pros:

  • No risk of water hammer due to slow closing (34 s)
  • The components are interchangeable and can be replaced individually if needed
  • High Kv-value because the fluid flows in a straight line

Downloads

Manual BFL
pdf
Download
Manual J4C-H140 (EN)
pdf
Download

Specifications

Nominal inner diameter
DN 125
Voltage
Choose the voltage required to operate the valve. AC stands for alternating current, DC for direct current.
24 V AC, 24 V DC, 120 V AC, 230 V AC
Material
Choose a housing material that is not corroded by the media and environment, and can withstand the temperatures and pressures. Check out our chemical resistance chart.
Cast iron
Seal material
The choice for sealing materials mostly depends on chemical resistance, temperature and pressure ratings. Use our chemical resistance chart for substance compatibility.
FKM (FPM)
Operation
The way the valve works. For example via an electric actuator, a pinch wheel or a pneumatic actuator.
Electric motor
Connections
Lug type
Material quality
Choose a housing material that will not corrode from the media and environment, and can withstand the application's temperature and pressure.
Cast iron GGG 40
Control signal
Open / close control is for example 2-point (1 control signal) or 3-point (2 control signals). Position control is for example 4-20 mA (recommended), 0-10 V, 2-10 V or 0-5 V.
Three-point (open-close)
Max pressure difference at 20 °C (bar)
Maximum pressure difference between output and input at room temperature.
6
Position feedback
Open & close limit switch
Min temperature (°C)
The minimum temperature of the fluid at which the system can operate continuously.
5
Max temperature (°C)
The maximum temperature of the fluid at which the system can operate continuously.
180
Max pressure difference as end valve (bar)
6
Degree of protection (IP)
The Ingress Protection (IP) rating indicating the product's resistance to dust and water, crucial for outdoor or harsh conditions.
IP67
Duty cycle
75%
Article compression class
PN 6
ISO 5211 Flange type
Standard flange design to mount an actuator, the size is expressed in F-xx. Note that not every valve is suitable to directly mount an actuator, sometimes an adapter is required.
Flange F07
ISO 5211 Square head size (mm)
Size of the valve's square head according to ISO 5211.
14
Bore (mm)
125
Disc material
Stainless steel