2000 l/m G3/8'' Filter 10bar - MAF300
This G3/8" pneumatic filter filters out contaminants larger than 5 μm to ensure clean air. The max flow rate is 2000 l/min (always use the flow chart for correct sizing). The semi-auto drain valve will open every time the compressed air is shut off. Suitable for a 10 bar max input and temperatures between -5 and 60 °C.
- Regular price
The filter removes water, dirt and other harmful particles larger than 5 μm for your air system. This model has G 3/8" ports. The maximum flow rate is 2000 l/min. Please note that the maximum flow rate alone doesn’t provide enough information to properly size your filter. Use the flow curve to determine if the pressure drop (droop) within your expected flow rate range is acceptable. The flow curve shows the flow rate for a set input pressure with multiple output pressures. For each output pressure, it can be seen how the pressure changes with increasing flow rate. It is recommended to use the device in the flat range of the curve, and not on the beginning or the end of the curve. The max input pressure is 10 bar and the temperature range is between -5 and 60 °C. The filter is rated for 5 microns, meaning it will not allow contaminants larger than this through. To empty, it has a semi-auto condensate drain with a drain capacity of 30 cm3. The housing material is made out of aluminium and the filter has a bowl made of Polycarbonate (PC). It has a position indicator to see the bowl level. It does not have a mounting bracket.
- Filters contaminants up to 5 microns out of the air to ensure a long lifetime and optimal performance of downstream equipment
- It has a semi-auto condensate drain to reduce maintenance cost
- It does not have a mounting bracket
- It has a semi-auto condensate drain, which is suited for systems that are regularly depressurized. In some other cases, automatic condensate drains might be preferred
Our range of high quality Mindman filters, regulators, and/or lubricators treat your pneumatic air to maintain proper air quality, reduce equipment down time, and reduce operating costs when installed correctly. The function can be derived from the series name. MAFR represent filter-regulators, MAF filters, MAR pressure regulators, MACP FRL units, and MAL lubricators. Higher numbers in the series (e.g. MAFR501) typically represent higher flow rates. They can be purchased individually, or as a combined it, such as an air filter regulator (FR) or an air filter regulator lubricator combo (FRL). Varying options of filter mesh sizes, operating pressure ranges, pressure adjustment ranges, flow rate, lockability, and drainage options are available. Mindman is a global leader in the pneumatics industry and manufacturers a wide range of high quality pneumatic products. They follow strict manufacturing standards (ISO 9001) and verify their end products with numerous testing and calibration steps to ensure they meet specifications. You can be assured of high quality, efficiency, life cycle and excellent cost to performance ratio for these air treatment units.