DN7.2 (Euro) Adjustable Flow Aluminum Air Blow Gun Short Nozzle

This is an aluminum adjustable flow compressed air blow gun with a DN 7.2 Euro coupling inlet port. The blow gun is equipped with a zinc-plated steel short nozzle. It has a 1.5 mm bore. The nozzle is screwed in a female M12x1.25 threaded outlet port.

The air blow gun is suitable for a pressure range from 1 to 10 bar (14.5 to 145 psi) and temperatures from -10 to 50°C (14 to 122°F). The internal parts are made out of brass and stainless steel with NBR sealing. Due to the on the handle, there is no cold feeling when holding and using the air blow gun. The internal parts of the gun are made out of brass and stainless steel while its sealing is made out of NBR.

To operate the air blow gun, connect it to a compressed air hose, point away from yourself and pull the trigger. You can control the air flow by partially pulling the trigger. Always wear protective gear to avoid injuries from any blown debris.

Pros:

• Easy setup and operation
• No cold hands thanks to the plastic coating
• Easily connect any hose with the standardized DN 7.2 Euro air coupling
• The flow rate can be adjusted by partially pulling the trigger

Cons:

• The ‘on/off’ trigger is not suitable for precise flow control
• No protective screen mounted on the nozzle

AGLA-ADJ series

The AGLA-ADJ series includes aluminum compressed air blow guns that provide a flow metering function. They are equipped with various intake port types. Intake port can be a female threaded G1/4 inch and other options include hose barbs and air couplings, of various sizes, screwed in it. The outlet port is equipped with a replaceable short nozzle. These air blow guns are suitable for the operating pressure ranging from 1 to 10 bar (14.5 to 145 psi) and the operating temperature ranging from -10 to 50°C (14 to 122°F).