G1/4" Plastic Air Blow Gun Replaceable Extension Pipe

This is an adjustable flow compressed air blow gun made of POM with a G 1/4 inch female threaded inlet port. The blow gun is equipped with an brass extension pipe nozzle. The blow gun is equipped with a brass extension pipe nozzle.

The air blow gun is suitable for a maximum operating pressure of 16 bar (232 psi) and temperatures from -20 to 60 °C (-4 to 140 °F). Due to the housing material, there is no cold feeling when holding and using the air blow gun. Its sealing is made out of NBR.

At 6 bar (87 psi) the maximum air flow rate is 190 l/min. To operate the air blow gun, connect it to a compressed air hose, point away from yourself and pull the trigger. You can control the air flow by partially pulling the trigger. Always wear protective gear to avoid injuries from any blown debris.

Pros:

• Easy setup and operation
• No cold hands thanks to the plastic housing material
• Fit the blow gun to your hose with any G 1/4 inch fitting
• The flow rate can be adjusted by partially pulling the trigger

AGLP-ADJ-16 series

The AGLP-ADJ-16 series includes POM compressed air blow guns that provide a flow metering function. They are equipped with various intake port types. Intake port can be a female threaded G 1/4 inch and other options include hose barbs and air couplings, of various sizes, screwed in it. The outlet port can be equipped with an extension pipe nozzle, a noise protection nozzle and it can also have no nozzle. The nozzles are mostly fixed, but the category also includes guns with replaceable nozzles. These air blow guns are suitable for a maximum operating pressure of 16 bar (232 psi) and temperatures from -20 to 60 °C (-4 to 140°F).